1. Drivers Knc One Sound Cards & Media Devices Download
2. Drivers Knc One Sound Cards & Media Devices -
3. Drivers Knc One Sound Cards & Media Devices Free

Drivers and BIOS. Below you will find drivers for all of EVGA's current products. Simply choose from the selections below and click download for whatever version file you want. Please note: For Linux or any other unlisted operating system, please contact the chipset or GPU manufacturer for software support. Download sound card drivers or install DriverPack Solution software for driver scan and update. Sound card driver for C-Media CMI9738A, CMI9739 AC97. Editor's rating. Realtek ALC101/ALC200 AC'97 Audio Driver (HP models) Realtek ALC101/ALC200 AC'97.

• 2How to make it work

Card features

• PCI interface
• SAA7134 chipset
• RDS-Tuner Chip SAA6588 chipset
• MPEG-Encoder Chip SAA6752HS
• FM, TV, Composite, S-Video and Audio inputs (outside)
• Two conectors (one is Audio out) (inside)

How to make it work

It was detected automatically as card=24.

The sound doesn't work from internal Mixer (at the moment - should work according to Video4Linux Mailing List).At the moment I use the Audio-out conector inside. If you hold the slot cover at the left and the PCI connector at the lower side, the audio out connector is the lower one. The 4 pins from the white MIDI-connector are from left to right: left-channel / ground / right-channel / ground. This one I connect to an audio input (Aux) of my sound card (SoundBlaster Live! 5.1). If I switch the input to this channel, the sound works fine.

The MPEG-Encoder works, as long as saa7134-empress and saa6752hs kernel modules are loaded. The MPEG TS stream is available at /dev/video1. The default parameters are:

In August 2008 the driver has been fixed to properly use V4L2 MPEG API (extended controls). According to Video4Linux Mailing List using a recent v4l-dvb repository, it's possible to change most of the encoder properties using v4l2-ctl.

There is some information, that mencoder supports V4L2 MPEG API, VLC has some support through pvr access module (i.e. it's possible to set one of the following resolutions: 720x576, 480x576, 352x576, 352x288).

Kernel

The card runs ok on kernel 2.6.11.4 and up.

The important parts from my message log:

Dmesg of kernel 2.6.13-15.7-default (x86-64):

Module parameters

Viewers

kRadio (dosn't work in the moment - see above)

Drivers Knc One Sound Cards & Media Devices Download

Teletext

See also

Linux runing Hardware chapter PCI-Karten (German)

Drivers Knc One Sound Cards & Media Devices -

Drivers Knc One Sound Cards & Media Devices Free